Introduction to Qimen Red Tea
Share
The following article was co-written with Fu Lei, a Qihong producer and postdoctoral researcher in Tea Science at Anhui Agricultural University. Try her Qimen red tea here.
Origin and Varietal
Qihong or Qimen Red Tea or Keemun, is a famous red tea from Qimen County, Huangshan, in Anhui Province.
The original raw material is the quntizhong (heirloom) varietal named zhuyezhong. Zhuyezhong is a cold-resistant sexually propagated varietal, especially suited to Anhui weather. It is the superior varietal for Qihong production, capable of producing the distinctive aroma of Qimen red tea known as qimen xiang.
Today, about 50 percent of Qihong is made from this original zhuyezhong varietal, with the rest being made from a cultivated variety named Hongqi No. 1. Fuding Da Bai and other cultivars have been introduced into Qimen County, but are rarely used for red tea.
Hongqi No. 1 was asexually propagated in Hongqi village, selected from zhuyezhong plants. It is an early-budding variety suited for very early Spring harvests. For that reason it is mainly used for Huangshan Maofeng green tea. Most newer tea gardens in Qimen County are made up of this cultivar, with zhuyezhong found in older gardens or growing wild on the mountains.
A Very Brief History of Qimen
When
Qimen is not an ancient tea, it is a modern one. The traditionally accepted origin date is 1875, at the height of the Qing Dynasty. During this period, exports of black tea were a crucial way for China to gain foreign currency. The spread of black tea production across Fujian, Anhui and beyond, is inextricably linked to China's place in global trade at the time.
According to historian Kang Jian, the development of Qihong "should be understood as a process comprising three stages: an initial phase around the eleventh year of the Xianfeng reign (1861); a second phase in the fifth year of the Tongzhi reign (1866); and its final establishment" in 1875. Recent evidence indicates that famous Qimen merchants such as Yu Ganchen were already trading in Qimen County in 1861, 14 years before the traditional 1875 date. Qimen did not suddenly appear, it arose in concurrent development with red teas in Fujian and Jiangxi, driven by international demand. The 1875 date is therefore when Qimen was finalised as a fully formed product, rather than a date of invention.
Where
Early Qimen red tea production was not geographically confined to Qimen County. by 1861, red tea was being produced in several neighbouring counties across Jiangxi and Anhui Provinces. In Jiangxi, Ninghong red tea was already established, and in the Wuhan export markets, these teas were sometimes marketed alongside Qimen teas under the collective name 'Ning-Qi' black tea. This suggests that, during this early period, there was not yet a clear commercial distinction between Qimen and similar regional red teas. Comparable teas were also produced in Jiande County and Fuliang, near Jingdezhen. Red tea continues to be produced in Fuliang today under the name Fuliang Hong Cha, using processing methods similar to those employed in Qimen. Ninghong Gongfu likely predates Qimen red tea and may have been among the influences on its development. Qimen eventually eclipsed both Fuliang and Ninghong red teas in terms of price and sales, which is why Qimen is better known today.
Who
There are three individuals commonly credited as inventing Qihong: Hu Yuanlong, Yu Ganchen, and Chen Liqing. There is evidence to support any one of them being the first to create Qimen, however it is most likely that all three were working at around the same time. Like Panyong Congou, the development of Qimen red tea was likely a regional phenomenon, driven by export demand, and involving multiple producers and merchants, rather than a single inventor. For more detail on this issue, see the article by Kang Jian cited below.
Types of Qimen
According to the Chinese Guobiao (national standards), there are four types of Qihong: Qihong Gongfu, Qihong Xiangluo, Qihong Maofeng, and Qihong Jinzhen. The four types are distinguished by how the leaves are shaped during production.
Qimen Gongfu: Higher grade Qimen Gongfu or Keemun Congou uses one bud and one leaf. It undergoes both primary and refined processing. Gongfu or Congou refers to the gongfu refining process, which is a process of sifting, bag-beating, and blending, that requires exacting skill and effort on part of the producer. In refined processing coarse larger leaves are intentionally broken by a bag-beating step, giving Qimen Gongfu its distinctive semi-broken appearance. The purpose of refining and bag-beating is to make a consistent grades that are suitable for blending together. Historically, the refining process was also used to pack as much leaf as possible into boxes for export.
Qimen Xiangluo: Xiangluo refers to a snail-like shape. Using one bud and one to two leaves, after primary processing the leaves undergo temperature-controlled shaping into a curled appearance, similar to snail-shape green teas.
Qimen Maofeng: Uses one bud and one to two leaves. Maofeng refers to the fact that the leaves are left in their original shape and no shaping step is used. The leaf shape is similar to Huangshan Maofeng green tea with natural twists and curves. Finer picked Qimen Maofeng will have prominent golden buds, while mature picked Qimen Maofeng will have an even black appearance.
Qimen Jinzhen: Uses one bud and one to two leaves. Jinzhen refers to 'golden needles.' After primary processing, the leaves are shaped into thin needles with prominent golden buds. Qi mei (gold eyebrows) and songzhen (pine needles) are alternative marketing terms for Qimen Jinzhen.
Qimen Fragrance
You will have likely encountered the term qimen xiang or qimen fragrance in marketing for Qimen red tea. Sensorily, qimen xiang is a compound floral, fruity, and honeyed aroma. The presence and degree of qimen xiang is important in assessing the quality of a cup of Qihong. It is the result of both varietal and processing technique.
In terms of varietal, only zhuyezhong reliably produces qimen xiang in finished tea. Studies show zhuyezhong may contain higher amounts of polyphenols and specific substances responsible for this fragrance.
In terms of processing, qimen xiang requires intensive rolling and well-executed oxidation. This is one reason why it is very difficult if not impossible to find qimen xiang in a red tea made from Hongqi. No. 1, because the tender pickings of Hongqi No. 1 cannot be adequately rolled to kickstart the oxidation of polyphenols.
The best grades of Qihong are distinguished by their possession of a more prominent qimen xiang together with what is called nentianxiang, or 'tender-sweet fragrance.' Nentianxiang is a higher-pitched, sharp, sweet and floral aroma. It requires tender pickings to develop, and is a separate aroma from qimen xiang. The best way to identify this aroma is to taste an early Spring picked qimen against a late Spring picked qimen. So long as other variables are somewhat consistent, the early Spring picked qimen will have a more sweet and fresh floral aroma. Both can still have qimen xiang.
Nentianxiang is relatively easy to achieve, because it is determined by picking time. Early Spring picked teas (Pre-Qingming) will possess it. Qimen xiang is more difficult to achieve, because as it is determined by both varietal and processing. A Qihong made from Hongqi No. 1 will possess nentianxiang because of its tender material, but will likely lack qimen xiang.
The most important thing to note about qimen xiang is that the fragrance should be present in the tea liquor itself. Aroma that is ephemeral and separated from the tea liquor is a sign of lower quality tea. This does not mean that qimen xiang should be too bold or overpowering either. Qimen xiang is an elegant aroma, and as Fu Lei says, "elegant fragrances have never been bold or ostentatious."
Qimen Grading Systems
Like all Chinese black teas today, Qihong is graded into separate grades. For Qimen Gongfu, there are two grading systems, one for domestic sales, and one for export.
The best export grades for Qimen Gongfu are Haoya A, Haoya B, and Teji (Special Grade), followed by First Grade, Second Grade, and Third Grade.
The best domestic grades for Qimen Gongfu are Li Cha (Gift Tea), Te Ming (Special Tea), and Teji (Special Grade), followed by First, Second, Third and Fourth grades.
The export grade Haoya A is roughly equivalent to the Te Ming domestic grade.
For Qimen Maofeng, Qimen Xiangluo, and Qimen Jinzhen, there are three grades: Special Grade, First Grade, and Second Grade.

Processing
The below explanation concentrates on Qimen Gongfu, which undergoes an elaborate refining process. Making Qimen Gongfu requires 14 stages of processing in total. Like Panyong Congou, Qimen Gongfu undergoes primary processing and refined processing. Primary processing (stages 1-7) transforms the fresh leaf into maocha (raw tea or semi-finished tea). Refined processing (stages 7-14) turns the maocha into finished tea. The below article details each stage of processing. It was originally compiled by Fu Lei, an Intangible Cultural Heritage Inheritor of Qihong Production Techniques, and translated into English with her permission.
Qihong Processing Part I. Primary Processing (Stages 1–7)
Stage 1 — Picking (采青)
Process: Fresh leaves are plucked between the Qingming and Guyu Festivals in Spring. This is usually between April 4th and April 19th.
Key Points: The core growing area for Qihong comprises Xiangdong, Puling, and Likou Town, Qimen County, Huangshan, in Anhui Province. The average elevation is 600-800m. The picking standard is one bud and one leaf for the best grades. The custom is to pick leaves in the morning after the morning dew has settled.
Stage 2 — Spreading (摊青)
Process: The freshly picked leaves are spread evenly on bamboo trays and left undisturbed for one hour.
Key Points: This begins evaporation of moisture and the withering step.
Stage 3 — Withering (萎凋)
Process: The leaves are spread and turned several times on bamboo trays for about four hours.
Key Points: The leaves should be periodically turned and spread to ensure even moisture evaporation. The ambient temperature during withering should be under 26°C. After withering, the moisture content in the leaves should be reduced to 58–60%. The leaves should be darker, supple, and pliable, and a faint floral fragrance should start to replace the grassy odour.
Stage 4 — Rolling (揉捻)
Process: The leaves are rolled in a rolling machine for about one and a half hours. For delicate bud-heavy pickings, gentler hand-rolling or a humid piling step can be done.
Key Points: The pressure during rolling ruptures the leaf cells, allowing tea juices to seep out and oxidation to accelerate. By the end of rolling, the leaves should be twisted into tight, slender strips.
Stage 5 — Oxidation (发酵)
Process: The leaves are left undisturbed and covered for eight hours in a dark environment with balanced temperature and humidity.
Key Points: This step is the oxidation of tea polyphenols through enzyme activity. The grassy aroma should fully recede, and floral, fruity, and honeyed aromas should develop. The leaf colour should change to a bright copper red. Both under-oxidation and over-oxidation must be avoided.
Stage 6 — Initial Drying (初烘)
Process: The leaves are dried rapidly at a high temperature of 100°C.
Key Points: This fixes the aroma and colour while driving out excess moisture.
Stage 7 — Redrying (复焙)
Process: Redrying is split into two periods. For the first period of redrying, moderate heat is used (about 85°C) for a shorter time. The second period is done at lower heat (70°C) for an extended time.
Key Points: Redrying should be conducted slowly until the finished leaf strips are glossy and dark, the golden tips are visible, and the floral-honey aroma is obvious.
After redrying, the the maocha (毛茶, raw or semi-finished tea) is complete. Maocha can be stored for up to a year before being refined into finished tea. When the time comes for refining, the maocha is taken out of storage and the seven refining stages are carried out in sequence, followed by charcoal roasting.
Qihong Processing Part II. Refined Processing (Stages 8-14)
The purpose of refining when making Qimen Gongfu is to turn maocha into separate batches, which can then be blended into consistent grades. This requires a series of sifting and breaking steps to result in consistent leaf sizes.
Stage 8 — Initial Sieving and Bag-Beating (分筛 · 打袋)
Process: The maocha is passed through a suspended size no. 7 sieve. Coarse, larger leaves are put into a bag for beating, while finer material goes on to further sieving. Further sifting separates the tea by leaf length into grades numbered from No. 5 to No. 9.
Key points: This process begins to sort the leaves into separate grades. For Qihong Gongfu, the coarse leaves in the bag are struck three or four times. Striking too hard may break the leaves too much. The right force depends on the producer's feel and judgment.
Stage 9 — Shaking and Winnowing the Unrefined Grades (毛抖 · 毛撩)
Process: The graded leaves are passed through a No. 9 shaking sieve to separate coarse from fine material. The material retained on the sieve is placed in a bag and beaten. The material passed through the sieve is processed by mao liao (毛撩), a hand-winnowing/sieving operation. A winnowing basket is used to separate the rough and fine grades. A larger sieve is then used to remove large strips.
Key points: The purpose is to further grade the tea and remove large strips. This step requires hand-sifting, moving the sieve in a perfectly circular manner.
Stage 10 — Clean Shaking and Clean Winnowing (净抖 · 净撩)
Process: Clean shaking follows the same principle as rough shaking but is more precise. The sieve is rotated so that the tea turns and shakes across its surface, separating coarse leaves from fine leaves. The larger pieces removed during shaking are processed separately; the smaller material proceeds to clean winnowing. Clean winnowing follows the same principle as mao liao but applies stricter standards.
Key points: “Clean” here means removing material from other grades and making the shape and size of the leaves of each grade consistent. Only when clean winnowing is complete and the tea within each numbered grade is uniform can the craft truly be called gongfu (工夫): work accomplished through skill, patience, and exacting effort.
Stage 11 — Removing the Short Ends (挫脚)
Process: A hand sieve is used to remove short pieces that do not meet the standard from each numbered grade of tea. A mesh one grade finer than the grade being processed is used. After the No. 9 grade, the material collected at the bottom of the sieve is dust and is sent for air separation.
Key points: Short ends are leaves that do not fit into the grade. The purpose is to finalise the tea’s form and remove excess tea dust.
Stage 12 — Air Winnowing and Colour Sorting (风选 · 色选)
Process: A three-outlet wooden airflow winnower is used to separate dust and leaves by weight. Strong, medium or light airflow is used, depending on the weight of the tea. The tea ends up in the three outlets. Finally, the leaves are sorted by colour to remove discoloured leaves.
Key points: Airflow easily separates the heavy leaves from light leaves and dust. Colour sorting is to ensure an even appearance.
Stage 13 — Floating-Sieve Sorting (撼筛 · 飘筛)
Process: Half a jin (250 g) of a numbered tea grade is placed into a shaking tray, and thrown upwards. The stalks fall faster and are removed. When tossing the tea upward, the tea is graded by the rate it falls.
Key points: This is essentially the hand-technique version of air winnowing, using weight and air resistance to grade the tea. The purpose is to remove stalks and excess downy surface material.
Stage 14 — Charcoal Roasting (碳焙)
Process: Wood charcoal is burned to 150–180°C, then covered with ash. Once the tea is placed in the roasting basket, the temperature at the basket’s upper surface should be around 100°C. When the leaf temperature reaches 85–95°C, the leaves are turned. The leaves are turned periodically every half hour, then at gradually increasing intervals. Partway through, the tea is removed from the roasting basket and the tea is allowed to reabsorb some moisture, before being returned to the basket to continue roasting. Roasting continues for two days and two nights.
Key points: Any stale aromas should disappear, and acidity should gradually subside. Roasting should last until the strips are glossy and dark, the golden tips are visible, and the floral-honey aroma is stabilised. Qimen Gongfu black tea is then complete.
Terminology and translation notes
· 发酵 — oxidation: In Chinese black-tea processing, 发酵 is conventionally called “fermentation,” but the principal transformation intended here is enzymatic oxidation of tea polyphenols.
· 初制 - is primary processing, which turns fresh leaves into maocha (semi-finished tea).
· 毛茶 / 头子茶 / 号头茶 / 脚: 毛茶 is semi-finished tea before final refining. 头子茶 refers to coarse or bulky material that needs to be worked open. 号头茶 means tea sorted into numbered size grades. 脚 (“feet”) is the traditional metaphor for the short pieces trimmed from a grade.
· jin (斤): a 斤 is Chinese unit of measurement for weight. One jin is 500g, so half a jin is 250g.
Sources
“A Brief Account of the Intangible Cultural Heritage Hand-Refining Techniques for Qimen Gongfu Black Tea.” (2025). Tea Industry Bulletin, (3).
- Kang, J. (2024). 祁门红茶源流考 [A historical investigation into the origins and development of Qimen black tea]. 中国农史, 43(3), 80–96.
- 2026 local standard DB34/T 1086—2026, Qimen Black Tea, and to recommendations made in 2026 by Lu Guofu, Chang Jinqiang, Tao Zifu, and Wang Chen.